How to use loader/ serial (Null) cable Viewsat Platinum

First off you need to get the following things:

1) A copy of the Loader for Viewsat
2) Your serial (Null) cable that came with your box .



Install the Loader on your PC then:

• Connect serial cable (NULL) to PC>STB
• Open up Loader of choice (PVR-Loader 1.1 or Loader2)
• Click on Tool>Configuration>Com port (Default is usualy com 1)
• Click on Open File
• Click on PC >STB (Notice the progression bar in loader)
• Turn the power in the back ON
• Wait for Loader say Completed. Then on box LCD front panel screen say I.N.S.T>END>0000 or until clock count to 0.001 or whatever is says on your unit.

IT IS VERRY IMPORTANT.

DO NOT TURN THE POWER OFF TO SOON !!!!


• Turn the power OFF in front and power OFF in back
• After downloading the “BIN”, unhook NULL cable from PC>STB
• Connect all the cables to your box/TV
• Turn the power ON in the back and then front
• Press Menu key
• Select Installation and press OK
• Select antenna Setup and press OK
• Select your Sat.
• Here if you have a diseqc switch enter the port #, Motor or Legacy SW
• No LNB Type need to select (from new, you have only two selection Standard and Universal). stb will select your lnb Automatic
• Press Exit and select Yes for saving the settings
• Your back to antenna Setup screen
• Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
• Select Auto Scan
• Press OK
• You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
• You don’t change nothing here, go down and select Scan Start and press OK
• You do this for all the Birds (Sat.) you have

__________________

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!