i now am the owner of a ultra lite and a 18" dish that i've put up, i can't say that i'm over confident that i'll be able to do it on my own...so if anyone could tell me what the steps are, areas/info. i should read up on that would be great...

on another topic...i love the NFL, was going to the bar and watching it every week, but since the bar closed down, i'm not able to see my fav. teams, would love to find a new bar to watch those NFL teams...

back to the new equipment problems, i see lots of satellite'e in the antenna setup, don't have a clue to which one to pick, or anything else to set up. the S is sometimes flashing 50 and the Q is sometimes flashing 4 or 12. my disk is pointing south west. i tried to load 3 files on my USB and plugged it into the ultralite turned it on, and it didn't seem to help much. do you load them one at a time maybe?

anything to help would be great, thanks...

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

first dont load anything till your sure,if you eant nfl channels you need dish net the best way is a eptical dish with 3 lnb,s. basically go to attenea setup change the sat to either nimiqi 1,3(bev) or echo 10,11 or echo 7 119 (dish) when you see good singal and quality scan it but first set your attenea settings for your lnb,Free Satellite TV Forum, Free to Air Satellite, Satellite Key, Dishnetwork Key, FTA Receiver, Viewsat, Coolsat, Pansat, fta satellite, fta file, satellite tv dish network, Fortec Files, Viewsat Files, Viewsat Keys, Coolsat Files, Coolsat Keys, Dishne heres a link.


Below is what most have:

Menu===>Installation then 0000 or 0937 or 2668 or 3570 then antenna setup then side arrow to ECHOSTAR 7=119W.then do the same for ECHOSTAR 8,10=110W,and NIMIQ 1,3=91.0W.

..............EchoStar 7=119W.........................EchoStar 8,10=110W.
LNB Power................ON........................... ...............ON
LNB Type..............Standard........................ ..........Standard (Dish Pro change to OCS-DP)
LNB Freq...............11250.......................... .............11250
22kHz.......................OFF................... .....................OFF
TP Freq.................12239........................ ...............
search option............ALL............................. ..............ALL
DiSEqC 1.0..............Port 1.......................................Port 2, (This should match the cable on the switch).only do if running more then 1 singal,if you only have 1 lnb DISEQE SHOULD READ NONE OR OFF
Motor......................OFF.................... ........................OFF
Legacy SW..............NONE.............................. ............NONE



NIMIQ 1,3=91.0W
LNB Power...........On
LNB Type............standard (Dish Pro change to OCS-DP)
LNB Freq.............11250
22kHz.................OFf
TP Freq...............12224 or one that is close.
DiSEqC 1.0...........Port 3 or 4 (this should match the cable on the switch).
Motor.................OFF
Legacy SW..........NONE

Good Luck.

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!