Have some problems with my viewsat ultra.

I have dish 110 & 119 on one dish (2 lnb)
Also I have on another dish with 1 lnb BEV.

I installed the switch that is coming with my receiver in the box.

I put BEV on diseq #1
110 on #2
119 on #3

I tried all the settings and I cant see the 110 & 119 signal, all that I see on diseq 1,2,3 and 4 is the 91 nimiq. Whem Im on 110 echostar I see on the right corner 91 nimiq, same on 119, some one can tell me what to do ? thanks !

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

2lnb? do you have to separate lnbs for 110/119 or is it the double lnb? double lnb looks like 2 eyes in one case.

__________________
Please do not PM or profile message me with questions that can be answered in the forums!!!!!


IN GOD WE TRUST. keep that always
testing pansat 9000hd and sv4000, sv360 premier, pansat 2700a, satopia ST1100-UT

http://www.maritime-fta.com/

for get dish 110 & 119 I have a plate with double lnb on a Y support, you know what I mean ? and for BEV I have another plate with a single lnb. thanks !

your problem is your 91 lnb replace it and your problems are gone.seen it many times.
hope this helps.

__________________
**NOTE:The information contained in any of my posts relating to dss satellite reception is information i have gathered from publicly known sources.just because us mods can say whats up or down can easily be found by reading on the net,no testing device is needed to see what is working and whats not,because everyone has the right to freedom of speech to pass along what they read.who are you to judge us.**

http://www.fortecfiles.com/general-d...-settings.html (dish settings)

and here are the settings you need for your dish as well. for 119 use port 1 and 110 use port 2

__________________
Please do not PM or profile message me with questions that can be answered in the forums!!!!!


IN GOD WE TRUST. keep that always
testing pansat 9000hd and sv4000, sv360 premier, pansat 2700a, satopia ST1100-UT

http://www.maritime-fta.com/

sorry, but I dont understand, you tell me to replace my 91 lnb ?
why I need to replace ? the signal from BEV is there, the only problem is I cannot separe the signal between dish and BEV, I get 91 nimiq on all the diseqs (1,2,3,4). I just want to be sure you understand my problem before to replace it, if after that, you still sure that I have to replace my 91 lnb I will do it because you know this things better than me. thanks !

your switch is not big enough to handle 3 dishes and is probrably burned out already those mini switches that come with the receiver wont last long on 3 different sats. here is one way to see if it is bad. run a direct line from the lnb starting with 110 and see if you get signal and qaulity on your receiver. then repeat the steps for the other 2 sats one by one. if they all come in singally then you need a bigger switch like a dp-44. if you have one lnb that you cant get anything on then makes sure your dish is dialed in right before you install another lnb

__________________
Please do not PM or profile message me with questions that can be answered in the forums!!!!!


IN GOD WE TRUST. keep that always
testing pansat 9000hd and sv4000, sv360 premier, pansat 2700a, satopia ST1100-UT

http://www.maritime-fta.com/

your 91 is the problem lnb just because it working doesnt not mean its getting along with the other two.,just unhook your 91 and see if the other two work.if so replace the 91.you could also go with a heavy duty switch as MASTER OF DISASTER has stated.

__________________
**NOTE:The information contained in any of my posts relating to dss satellite reception is information i have gathered from publicly known sources.just because us mods can say whats up or down can easily be found by reading on the net,no testing device is needed to see what is working and whats not,because everyone has the right to freedom of speech to pass along what they read.who are you to judge us.**

thanks for the input newfie. i dont use bev sats so i needed your info on this as well bro.

__________________
Please do not PM or profile message me with questions that can be answered in the forums!!!!!


IN GOD WE TRUST. keep that always
testing pansat 9000hd and sv4000, sv360 premier, pansat 2700a, satopia ST1100-UT

http://www.maritime-fta.com/

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!