Hello ppl
i have a question im running an sw-44 switch obviously cause im running 3 receivers on 3 different tv. now my setup is on port 1&2 i have Charlie 119 %110 and on port 4 im running my Beverley 91.now when i scan Beverley i don't get all the channels it seems to bounce some channels on 110.

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

I have read that there are issues with trying to connect the 44 switch to the three receivers due to power inserter. And needing a power source. Will try and find more info.

I did come across a diagram that shows how you could connect the 3 receivers. Click once then twice to enlarge the picture.

Hopefully someone else, that might have the 44 switch, can give more info.

Attached Images

4Sats & 3 Receivers.jpg (100.7 KB, 24 views)

__________________
Testing: Viewsat Xtreme, Sonicview 360Elite
Suggest this hard drive: SimpleTech SimpleDrive SP-UF35/500 GB USB 2.0 External Hard Drive (designed by Pininfarina)

Visit the Site Sponsor for your FTA needs:
http://www.maritime-fta.com/

thank you so much for the support

what type of lnbs are you using with 3 recievers you can also run a dp 34 switch the bounching of channels would be when your in your setting make sure top right it shows the signal your working on if it doesnt thats were the channels get messed up so for bev make sure lnb type is right transponders it correct best to set that at 12239 another thing and i dont know why is you have port 4 in use change it to port 3 every time i try to use post 4 for 91 i end up having problems

__________________
testing sv 4000 cw 800 captain 7100 SV360Elite sv 360 premier Viewsat/Plat-lite viewsat lite
Try these channel if having difficulty with EPG.
Sat.... Cha
61.5.....574,195
82........2718
91. ......218
110......321
119......239,200

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!