how can i tell if i am hooked up to the server? i am on channel 304 the hbo2w and am getting a good signal but still says no service or scrambled. why won't this setup work? someone must have the answer. lol

have read and printed out all the ihub manuals and trouble shooting files but still cannot get the ihub to work.. have a sv8000 using belkin powerline adaptors to the ihub. settings in the config are as follows

user
setting type dhcp
local ip my ip
local port 1920
user dns yes
subnet 255.255.255.0
gateway my ip
use dns yes
domain name www.svftaiks.com
dns ip my ip
server port 1920
seral number is the ihub number. have double checked # with
magnifying glass to be sure it is correct.
used priorty both


all i get is no service or scrambled. just have sat echostar7 and echostar 8,10in system. hdthr is working but no n3.

equipment is as follows

wildblue satilite modem hooked to belkin router

router connected to desktop xp computer and to belkin powerline adaptor

belkin powerline adaptor connected to 120v house wire outlet

other belkin powerline adaptor connected to 120v outlet and to ihub using rj45 ethernet cable

ihub connected to sv360 premier

green and amber lights on at the ihub

no n3 channels


any and all help would be greatly appreciated. thanks in advance

could i have a bad ihub since i get no n3 channels but i do get channel 100 and VS channel.

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

domain name www.svftaids.com
try svftaiks dot com

__________________
testing sv 4000 cw 800 captain 7100 SV360Elite with ihub sv 360 premier with ihub Viewsat/Plat-lite viewsat lite viewsat ultra lite sv 8000 viewsat 7000
Try these channel if having difficulty with EPG.
Sat.... Cha
61.5.....574,195
82........2718
91. ......218
110......321
119......239,200

typo error on my part. domain name comes up auto

u prolly did but did u click apply u didnt mention it in your post and what do u have set in your user options cardless or iks or both i m using both and sometimes a hard boot can make it re connect

__________________
__________________
TESTING S/V-360elite--C/W800S--S/V4000
__________________
Anything i post is for Educational & Testing Purposes only.. what you do with it is up to u and by no means my RESPONSIBILITY or the RESPONSIBILITY of this SITE !

'Never Explain- your friends do not need it and your enemies will not believe you anyway.'
Elbert Hubbard (1856-1915)

yes i did click apply. I have both a green and an amber light on the ihub and have the ihub connected to the sv8000 and a ethernet cable from the belkin powerline to the ihub. in user options there is no option for cardless or iks only options are ihub or both. is something wrong with the ihub hook up so that i am not getting the user options you mentioned?

i have a 360 elite and i m using both i m not sure about the 8000 prolly a little different set up but i think u should be set on both just my opinion it will let u watch what ever is left of n2 plus u get n3 hope this helps other than that it sounds like u have covered all the bases

__________________
__________________
TESTING S/V-360elite--C/W800S--S/V4000
__________________
Anything i post is for Educational & Testing Purposes only.. what you do with it is up to u and by no means my RESPONSIBILITY or the RESPONSIBILITY of this SITE !

'Never Explain- your friends do not need it and your enemies will not believe you anyway.'
Elbert Hubbard (1856-1915)

i can get what's left of n2 but no n3 at all.

On the SV8000HD just use both....

Your settings seem to be correct. After setting up the ihub you toggled OFF the rear switch and then ON. The LED lights look good.

Your post:

might be the problem. I know of Bev and Charlie channels working but not sure what you would get at Galaxy 7.. What satellite position is that?

sorry i didn't mean gal7. I ment echo 7 at 119degrees. duh and yes i have toggled the rear switch off and then on again for the hard reboot.


QUOTE=FlaRon;180510]On the SV8000HD just use both....

Your settings seem to be correct. After setting up the ihub you toggled OFF the rear switch and then ON. The LED lights look good.

Your post:

might be the problem. I know of Bev and Charlie channels working but not sure what you would get at Galaxy 7.. What satellite position is that?[/quote]

When you setup the ihub did you install the ihub over the program you had in there? Have heard of some problems.

I know for a friend he followed these steps:
During the setup the Local Ip and other IP information plus the Domain Name filled in automatically.

In looking at your local ip:
It has less numbers that I have seen before. xxx.xxx.x.xxx
But then again it very well could be correct for you.

Another issue might be the router you are using. I know you are using the belkin powerline adaptors to the ihub. Believe you go from the router to the powerline adapers.

But...You do have the LED lights..

There are just so many different routers and other items being used. I would say try the set-up again... See how that works.. Let us know the Router you are using plus the company providing your high speed internet. I'll search sites I visit if the set-up again does not work and see if I can find out anything..tomorrow...

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!