need help with ihub - Page 2 - Free To Air TV Forum, FTA Keys and Downloads, Dish Network, Nagravision 3

Johnok2 · #11 (**permalink**) 25th June 2009, 04:21 PM

Your settings show that local port is 1920, it is my understanding that it should be 80. You might try that

stevedore · #12 (**permalink**) 25th June 2009, 05:13 PM

my local port is 1920 and working fine here

aquavettes · #13 (**permalink**) 25th June 2009, 10:24 PM

tried both; 1920 and 80 same result no change

Quote:

Originally Posted by stevedore

my local port is 1920 and working fine here

56caddy · #14 (**permalink**) 27th June 2009, 02:52 PM

Well I'm glad that I am not the only person having the same problem! .I have a motorola modem D-link/ MBR-1310 router. My settings are :
Static
Local IP 192.168.0.200
Local Port 80
Subnet 255.255.255.0
Gateway 192.168.0.1
USE DNS Yes
Domain Name WWW.SVFTAIKS.com
DNS IP 192.168.0.1
Server Port 1920
Serial Number xxxxxxxxxx
Apply Yes
These are my settings. I loaded the last bin powered up motem router reciever in that order and did a hard bout. I have lights working in the IHUB. I went to my router and opened port 1920/80. I'm having no luck. It did work when I hooked it up to the motem for five minutes, but you can't use it with a modem, you must use a router. Thanks to all! P.S I hope someone can help me![ I did all the manual read and troubleshooting.]

HuRider · #15 (**permalink**) 27th June 2009, 07:49 PM

Quote:

Originally Posted by aquavettes

how can i tell if i am hooked up to the server? i am on channel 304 the hbo2w and am getting a good signal but still says no service or scrambled. why won't this setup work? someone must have the answer. lol

have read and printed out all the ihub manuals and trouble shooting files but still cannot get the ihub to work.. have a sv8000 using belkin powerline adaptors to the ihub. settings in the config are as follows

Here is some help....

user
setting type dhcp

local ip 192.168.2.3 ( Double click on the internet icons in your task bar and under the support tab write down the IP address and gateway. Enter your IP address and only change the last three or two numbers to anything)
local port 1920 ( Change to 80 )
user dns yes ( Mine does not have this )
subnet 255.255.255.0
gateway 192.168.2.1 ( Type your gateway address here )
use dns yes ( NO )
Server IP ( 77.93.75.89 )
domain name www.svftaiks.com (This will go away )
dns ip 192.168.2.1 ( Enter your gatway )
server port 1920
seral number is the ihub number.
At the bottom click on apply
have double checked # with

Go to channel 200, if not then power off diconnect iHub, wait a minute turn your unit on and insert the iHub..if your getting 100 then something is right...get back
magnifying glass to be sure it is correct.
used priorty both

all i get is no service or scrambled. just have sat echostar7 in system. hdthr is working but no n3.

equipment is as follows

wildblue satilite modem hooked to belkin router

router connected to desktop computer using vista and to belkin powerline adaptor

belkin powerline adaptor connected to 120v house wire outlet

other belkin powerline adaptor connected to 120v outlet and to ihub using rj45 ethernet cable

ihub connected to sv8000

green and amber lights on at the ihub

no n3 channels

any and all help would be greatly appreciated. thanks in advance

If everthing works let us know

swamplog · #16 (**permalink**) 27th June 2009, 08:17 PM

my elite is going off every 5 min . they only channels i can get is 105 108 & 300's

Lar51 · #17 (**permalink**) 27th June 2009, 08:19 PM

i wish i had channels to watch?
who next

Lar51 · #18 (**permalink**) 27th June 2009, 08:54 PM

anyone for a game of hearts

aquavettes · #19 (**permalink**) 30th June 2009, 12:35 AM

Quote:

Originally Posted by aquavettes

how can i tell if i am hooked up to the server? i am on channel 304 the hbo2w and am getting a good signal but still says no service or scrambled. why won't this setup work? someone must have the answer. lol

have read and printed out all the ihub manuals and trouble shooting files but still cannot get the ihub to work.. have a sv8000 using belkin powerline adaptors to the ihub. settings in the config are as follows

user
setting type dhcp
local ip 192.168.2.3
local port 1920
user dns yes
subnet 255.255.255.0
gateway 192.168.2.1
use dns yes
domain name www.svftaiks.com
dns ip 192.168.2.1
server port 1920
seral number is the ihub number. have double checked # with
magnifying glass to be sure it is correct.
used priorty both

all i get is no service or scrambled. just have sat echostar7 in system. hdthr is working but no n3.

equipment is as follows

wildblue satilite modem hooked to belkin router

router connected to desktop computer using vista and to belkin powerline adaptor

belkin powerline adaptor connected to 120v house wire outlet

other belkin powerline adaptor connected to 120v outlet and to ihub using rj45 ethernet cable

ihub connected to sv8000

green and amber lights on at the ihub

no n3 channels

any and all help would be greatly appreciated. thanks in advance

finally working but freezing alot. only stays on for about 3 minutes then freezes. better than nothing

thanks!!! for everyones help

orchidman12345 · #20 (**permalink**) 2nd July 2009, 02:36 AM

i have the same problem how did you get it to work

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode