Run a 2700 from a DP34 switch? - Free To Air TV Forum, FTA Keys and Downloads, Dish Network, Nagravision 3

mrartou · #1 (**permalink**) 9th October 2009, 03:39 AM

Anyone run a Pansat 2700 from a DP 34 switch? If so can it be done with an existing pay DN system by adding the second DP34 in line with the first DP34? OR will they (big DN brother) see the 2700 FTA receiver? And finally how does it get hooked to the receiver, is a Discq switch still needed?
Thanks in advance.

tito123 · #2 (**permalink**) 9th October 2009, 01:44 PM

run a wire from dp-34 to reciever , dp -34 is dn system is for 4 recivers

nvflash · #3 (**permalink**) 9th October 2009, 06:13 PM

Run the sub box to output port one on the DP34, this will power the switch. Run any of the rest of the outputs to any other box and it will work.

mrartou · #4 (**permalink**) 10th October 2009, 02:13 PM

Current settings are port 1 & 4, now that the Discq switch will not be used what should the settings be in this area of the setup?
Thanks again for the quick responses!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode