Updating Pansat 2700A to b-75.

IMPORTANT ---- DO NOT turn receiver ON and OFF. You should only turn it ON once and
that's during Step 1. Other than that, your receiver is to stay ON until Step 2 is
complete and you're done programming it. Factory default reciever before proceding!!

1) open GTRom Loader v27.02 [Pansat2700A - B75] and load the Pansat 2700A_060526_115_api.
Leave reciever ON DO NOT SHUT IT OFF. Let reciever fully boot until it displays ON.

2) Open Boot_2700A(b75)_(07)0310 load it to reciever using GTRom Loader v27.02 [Pansat2700A - B75] until complete.

3) IT now should have b_ 7_ 5 rolling across the front of the receiver
"DO NOT SHUT RECIEVER OFF"

4) use the same loader GTRom Loader v27.02 [Pansat2700A - B75] and load the Pansat 2700 X-87BL_070904_B75_209_api to reciever.



After "Step 2" when boot upgrade is complete the front of the receiver should have b_7_5 going
across the front Panel, if it doesn't then you did something wrong so do not load the 209 bin,
you just need to go back and start from the beginning and read the post more carefully.

When Step 4 is complete the receiver will be working. You could then load your Channel List or
do a Scan, whichever you prefer and enjoy TV.


-Once again, DO NOT turn the receiver ON and OFF in between steps or all that's going to happen
is that you're going to get a continuous knight rider lights across the receiver.

Good Luck!!

__________________
[b]Testing convert FLU to 2700, CW800, Visionsat IV200 & SV-360 Elite

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!