So after loading the latest software from the server we are back up and running but a window comes up every now and then that says the public key will expire. If you bought from a dealer you can contact he is supposed to give you a working key. As of right now if you bought from an idiot like I did (maybe I am the idiot) you have no way to get a key. I hope some dealer out there will provide a service to obtain these keys. If you are a dealer or someone who has access to these keys please post so people who are in my position ( there must be more than just me) can obtain a key. thx This is definitley going to be a deterant for other people to buy this box

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

Setting up the ILink IR210 (Black Devil)
1. Connect to TV and Antenna
2. Connect dongle and network cable to STB.
3. Turn on STB and TV
4. STB will go to menu.
5. Now copy the current bin file (today 2.56) to usb stick using computer.
6. Place usb in STB.
7. Go over to the Utility then down to the USB.
8. Now scroll down to the file you want to load (today 2.56) hit ok and select the
Boot Loader Upgrade. Hit ok. Your file will load and reboot the STB.
9. After it goes back to the menu then Options and Control Panel. Press OK.
Select Local Area. (select the country,state, city exit.
10. Now scroll to time. Set time and exit.
11. Go to Network and select IP setup. On Network settings select Auto.
Then scroll down and select apply. That will populate the rest of the info needed.
12. Select Net Application then change to EPCS, scroll down to Key and make sure
The numbers ABDBADADA8ABA8AFAAAAAAAAAAA8AC D8 are inserted there and hit ok.
13. Check for software update. Scroll to SW download select Upgrade via Network.
14. If new software is available down load and let load and reboot.
15. Go to installations and select Satellite Search.
16. Select Satellites to set up. Now scan from there.
17. Very Simple to set up.

thx I am setup and running but I was concerned for future keys. If a dealer does not post keys we are screwed since the current keys will expire

set up the same way as instructed , worked good until today ..asking system id not registered..

Ilink Server has gone Private



No more Ilink for Nano2 the server for Ilink has gone Private and you need a key to access the server it was a good run now we will have to wait for new files for the nano2 before we can use it as a Nano2

It is possible to load the nano2 files when released onto your i-link they are essentialy the same box be patient......ricklbert

I would not mind paying a small fee to join a private group anybody know where I can go to join? any info is appreciated

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!