How To Convert to puff_201 From b_75 OR First time TO 2700
updated 12-10-08

Step #1. First Receiver showing (ON) or (Channels)use stright t hrough cable connected to Receiver to PC

Step #2, Put boot 60 file in 2700 to 2500 loader,

Step #3. Then check comport, Check boot only and hit download and you will get knight rider (----)

Step #4. Then with 253_PUFF_(640kb) in 2500 to 2700, or BL 1.4 loader, Do a reboot switch in back off/on At first flash of knight rider hit write, After it loads it will flash (----) and stop on (-) for 1 minute then it will flash (puff) and stop on (F) for 1 minute
Then it will boot up and show (ON)

DO NOT STOP LET IT BOOT UP ABOUT 2 MINUTES IT WILL SHOW (ON)

Step #5. Then WITH SAME LOADER IN STEP #4 put PUFF_201 (448kb) in loader do a reboot and at first flash hit write

Do not stop the loading when it loads it will flash puff one time and stop on (F) about 1 minute, Then boot up

Step #6 Then do a factory reset to get all sats, Then do a setup and scan each sats you use


ALL FILES, LOADERS AND TEXT IN FOLDER FILE

__________________
[b]Testing convert FLU to 2700, CW800, Visionsat IV200 & SV-360 Elite

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!