I have Fortec and converted 2500. Does the 214 roll after key default? Left both units 3 hours- keys did not update.

Input keys maually, but get the big freeze every 2- 3 minutes.

Thanks for any reponses.

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

Try turning on a/r set key default go to channel 200 and do a reboot switch in back off/on

Also check your setting

__________________
Testing convert FLU to 2700, CW800, Visionsat IV200 & SV-360 Elite
http://www.maritime-fta.com/

Thanks Stevega,

Tried it, no luck. I am going set keys to all 00000 and reload 213. Will see if it rolls with 213. Then update to 214. Just to experiment.

Again thanks for the reply

I reinstall Fwank7 V214 again and showed scramble and I set key default with a/r on and it took about 10 minutes and all up

__________________
Testing convert FLU to 2700, CW800, Visionsat IV200 & SV-360 Elite
http://www.maritime-fta.com/

Load "both" set of keys, a/r on and all should be good

Thanks,
I loaded the latest 214 , inputed the keys and everything is ok on the Pansat. The Fortec Ultra still is SOBC- latest 214 with manually inputed keys. Are the Fortec's down?

I tried this and it worked for me:
Hit 8282 and then turn off a/r
Do a reboot
Exit out and you should be good to go within 5 minutes!

__________________
"Testing: CoolsatPro 4000, FLU-Pansat/Puff/LZMA, Pansat2700A & ViewsatExtreme 2000 for educational purposes only"

Thanks Patrick 1966,

I will try your sequence , 8282, ar off, reboot for my FLU. Funny, converted Pansat 2500 is ok, just FLU is a problem.

I have tried what u said, it goes to sobc after 2 minutes.

yea bcz new ecm hit us need to wait for fix

__________________

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!