Converting to ''PUFF''

--------------------------------------------------------------------------------

1.With Serial cable connected to STB and Booted up showing (ON) load BOOT_60 With 2700 to 2500 loader click on boot file only, hit download and after it's loaded you will get knight rider

use the bl serial loader thats say 2700-2500 with the boot 60 file after its done loading u will have knightridder lights than to step 2


2 With knight rider on box running, open & run BL 1.4, 2500 to 2700 or fortec JHD loader what ever one you used before
now u can use the 2500-2700 loader to load
theres a big difference between both loaders
bl loader 2700-2500 thats going back
bl loader 2500-2700 thats going foward


3. Then load CS_253T_PUFF_BOOT_Serial_Lightning.bin or any other jvvh253_ Puff_BOOT_Serial Bin (2 minutes to boot all the way up) DONE. NOTE THE 253T got PUFF in it

please wait the 2 whole min and the flu will do the rest alot are not wanting to wait the whole 2 min thats what is cuasing problems
''boot all the way up'' meaning all the way where it shows a channel


4. Then load the CS_254T or Jvvh254 and it load same way as you alway loaded the latest bin before

after u load the cs254t or jvvh2254 turn A/R off and do a factory reset and rescan your channels again
now if u have done the above right than u should have tv now and converted to ''puff''
big thanks goes to stevega for this


thanks to DOORNAIL for this

this might help alot to convert to ''puff''

Attached Images

PUFF install 1.jpg (79.5 KB, 223 views)

__________________
[ANYONE A WRESTLEING FAN PM ME]

*****WWW.MARITIME-FTA.COM*****

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!