Jr · #1 (**permalink**) 4th October 2006, 11:54 PM

Key entering for FORTEC RECEIVERS

Lifetime:

1. Click on MENU on your remote
2. Press the RIGHT ARROW button 2 times
3. Press the DOWN ARROW button 2 times until you have highlighted CODE and click OK
4. Enter the password 1010 (, enter 1668 for ultra)
5. Press the DOWN ARROW 3 times until you have highlighted NAGRAVISION and click OK.
6. Press the RIGHT ARROW button 10 times until you see "Dish Network" on the top right. ( It will show provider id 01).
7. Press right arrow until you are on correct key.
8. Change the keys to the current keys with your remote. Remember the Alpha entries begin with SAT=A, INFO=B, TV/RADIO=C, etc
9. After the keys are all changed, click OK then press EXIT 2 times

Ultra:

1) Hit menu on the remote, and then push right arrow twice
2) select the "code" you will be asked for password enter 1668
3) press down until you get to Nagravision hit ok when you get there you will see polsat or something near the top right corner
4) press right arrow until that changes to dish network make sure you are on "Provider ID" when pressing the right arrow so it says dishnetwork.
5) when it says Dishnetwork under "Key number" change that to 00 or 01 by pressing right arrow
6) go under "key" and type in the new keys. Remember function buttons are alpha entries.
7) press store and exit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode