It's a good idea to delete any previous channel lists, favorites, sats and then redo your setup from scratch including scan

If still no channels:

- make sure correct sat, switch settings are selected
- do a channel scan
- make sure your signal/quality levels are good (60+)
- try loading a channel list
- try a "factory default" reset
- read, read, read.....

hope this helped,

1) Turn Ultra off from master switch -- in back of unit

2) Plug in a straight through 9-Pin RS232 serial cable, (NOT null modem - I'm using a standard rs232 cable w/gender changer)

3) Turn on unit w/ master switch

4) Power off w/ front panel power button - clock will be displayed

5) start Downloading Tool v1.31.exe (com1/115200) (or fav prog)

6) In "model" box type: LTA

7) Browse for "boot_Lifetime Ultra_ver60_040515.bin" (boot file ver6)

8) Select "boot" (radio button)

9) press send

10) wait for complete message box! - IMPORTANT -


Now for the actual bin file:

11) leave all as is except change "model" box type to: Al7bar FTA Ultra

12) FTA Ultra_040823_244_api(NTSC).bin" (flash file)

13) Select "Appz" (radio button)

14) press send

15) wait for complete message box! click ok and your done...

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!