How to fix a dead cw600s or 600p
________________________________________
CW is forgiving
600s or 600p either one can fix itself do the following

1 STOP don't try to put the correct bin on
2 power off the receiver
3 turn on the power from the rear at the same time hold the front power button the receiver will go to boot mode and thats what you do want
4 load the factory bin
5 load the CORRECT bin this time
6 activate patch, Press F1 and 000
7 setup antenna and download channels

CaptiveWorks 600S Premium Features Guide

===========================
How to change EPG style? (Available in V1.13 Premium)
===========================
Now EPG style can be changed to new or old style. New epg style looks great but if you are using full channel name Old epg style will work good for you because it got more room to show full channel names. Here is how you can change EPG style.
Main Menu ->System settings-> OSD -> EPG Style -> Old or New

=======================================
How to Turn ON/OFF Display Icon feature? (Available in V1.13 Premium)
=======================================
Premium model allows you to see Icon in EPG and also on right upper corner of the screen. To make this feature work you have to load the Icon.bin file to your receiver. After you have loaded the Icon.bin file must turn this feature ON/OFF to see Icons in EPG and on screen.
Main Menu ->System settings-> OSD -> Display Icon -> Yes / NO

==========================
How to set 10/24 channels display?
==========================
Main Menu -> System Setting -> OSD -> Scroll down to Channel List change that option to 10 or 24.
Now whenever you will press Ok button on your remote it will show 10 channels or 24 channels.
If you press F1 key system will sort all of the channels

=====================
How to set Event Timer on fly?
=====================
With new OSD you can set event timer to certain event that will start in future sometimes on fly. Before set an event timer just make sure EPG is fully loaded.
EPG -> Scroll to the event that you want to tune automatically and press “Green” key from your remote. A window will open to confirm date and time that event will start; Now just Press Ok to set.

=======================
How to Factory Default a CW600?
=======================
New OSD the location for this feature is changed but it works exactly the same as in old OSD.
Main Menu -> Installation -> Factory Default

===============
How to set time?
===============
Main Menu -> Channels Manager -> Timer -> Time setup

===========================
How to Enable Patch or Disable Patch?
===========================
Exit all menus, Press F1 key; the LED will display 'H', then press '000'

===================
How to Edit Patch key?
===================
After Enable patch key, go to
Main Menu-->Accessories--> Key Menu

========================
How to configure the SID sort?
========================
From main menu->system setting->system->channel No. style can change:
Normal: Normal sort order
SID sort: Dish order

=====================
How to Category Search?
=====================
1) Make sure the epg is loaded- to do that just open the epg screen and see if the boxes are full, if not go choose any box that has no epg and wait 15-20 sec and it will be filled. (You only need to do this once in the beginning).

2) Then exit and hit F2 on your remote.

3) Category box will open, just choose what category you want to watch and hit ok

4) After 2-3 seconds, a list of channels will open which are CURRENTLY playing these categories (every half hour this list changes when a new show is finished or started)

5) Next to the channel there is the title of the show, if you hit INFO button it will open the full information, hit INFO again and it will disappear. Just select what you like and watch.

================
How to Blind scan?
================
BLIND SCAN function can be accessed by going to
Main Menu-> Installation -> Antenna Setting -> selecting the satellite
that you want blind scan and press Yellow key on your remote.

=========================
How to Clone CW600s Box to Box?
=========================
From DigitalPlus:
1) Connect the master and slave box with twist RS232 null modem cable (pin2 to pin3, pin3 to pin2, pin5 to pin5).
2) Start the master receiver and press "POWER" key to make it standby “- - : - -“.
3) Start the slave receiver, in the master box the led will display 'H' and blink it.
4) Input the password:
111 ---- Transfer S/W
222 ---- Transfer data
333 ---- Transfer data, then S/W
444 ---- Copy whole flash except Boot Loader.
5) After finishing inputting the password. Transfer will begin. When it finish, the LED will Display "-End". Disconnect the cable, start your receiver.
Note: By the different password, you can do what ever you want to do for Box to Box.

=====================
How to set DishPro LNBs?
====================
DishPro LNB settings can be accessed by going to
Main Menu-> Installation-> Antenna Setting-> LNB type-> OCS-DP

===============================
How to set channel lock on certain channels?
===============================
Channels can be locked by going to
Main Manu->Channels Manager->TV Channels -> Right Arrow-> Lock/unlock go to specific channel and press OK key on your remote.

=============================
How to video adjustments option menu?
=============================
Video options can be accessed by pressing zero “0” when view your normal TV. Brightness, Contrast, Saturation, Hue, Sharpness and Tint can be adjusted

==================
How to Auto TP?
==================
Auto Transponder Update can be Turn ON and Turn OFF by going to:
Main Menu ->System settings-> system-> Auto TP changed to ON or OFF.

======================================
How to get Seven Days of EPG on a CW600s Premium?
======================================
CW600s Premium allows to get 7 days of EPG. To get full 7 days of EPG tune to any channels on listed Transponders. EPG will Populate for full 7 days in about 10-15 mins, if you have more than one echo sats connected it will take 15-30 mins to populate for all of sats.

Some TPs below help you get 12 hour EPG:
Dishnetwork:
TP: 12530
CHs : 457 or 517
BellVU:
TP:12268
CHs : 212 or 615


=====================================
How to change Time setting from Military to Regular?
================================== ===
To change time from Military to Regular go to
Main Menu -> System Setting -> OSD -> Time Display Format change to 12/24.

=======================================
How to search Favorite show channel number and time?
=======================================
Shows can be searched with start time and channel number by pressing the Click on
Find key on your remote -> select OK -> then type your show name and search.

===============================
How to Turn ON/OFF Auto Roll feature?
===============================
Autoroll feature can be turn OFF and ON by going to:
Main Menu -> System Setting -> OSD -> Autoroll -> ON/OFF

==============================
How to Turn ON/OFF key update message?
==============================
Key update message can be turn OFF or ON. This feature can be accessed by going to:
Main Menu -> System Setting -> System -> Key Update Message -> ON/OFF

=======================================
How to turn ON/OFF Dishnet/BellXvu full name display?
=======================================
This unique feature can be accessed by going to:
Main Menu -> System Setting -> System -> Scroll down to the next page -> ON/OFF

==============================
How to select packages for Dish and Bell?
==============================
******** and **** *******Vu packages can be accessed by pressing the “SAT” Button from your remote and choose the option you like


=============================
How to fix NTSC/PAL scrolling screen?
=============================
This is very frusctrating when we hook up our receiver to the TV and video is rolling. If we dont know how to fix it, it is imposible to fix this kind of problem some times. It hepens most of the time by chaning the system info by mistake or by load a custom channels list. Here is a little "how to" guide to fix this kind of problem. You can use this guide for both Premium and regular CW600s model.

Reboot your system once; just to make sure you are out of all menues
A: Press Menu
B: 3 Times down Key
C: Ok
D: OK again
E: 5 Times Down key
F: Right/Left key untill it goes to NTSC
__________________


CW600s Premium S/W Upgrade Guide!
Tools Need to update your receiver CW600s Premium Receiver:

1- Null Modem Cable
2- Newest bin Patch
3- Loading Software "Loader v1.06.zip"

Create a folder on you PCs desktop name "CW_Premium" using Winzip or Winrar unziping program to unzip all files to "CW_Premium" folder.

1) Connect your PC and receiver with twisted RS-232C Null modem cable.

2) Power off the receiver from the back switch.

3) You can load bin file using two methods “boot” Mod and "Standby" Mod. If you want to load the sofware using "Standby" Mod go to #4.
Here how you get into “boot”MOD:
Hold power button on the front of the receiver and turn the power ON from the back of the receiver. You will see a word “boot” on the front LCD screen of the receiver. Go to #5.

4) Turn receiver Off from the back and then ON the receiver; you will see 00:00 now press "POWER" key on front of the receiver panel to make it standby, the LED dot will display “- - : - -“.

5) Start New LoaderV1.06.exe check if the right COM port is selected then select
<Download Main S/W>, press <Open> and select the bin file,“CWPV1.XX_date.bin" then click <Start>, upgrade will begin.

6) After finishing, the receiver LED will display "-End"
If your experience any problem during the upgrade start over again.

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!