I haven't used my Coolsat 6K in one year, I have a viewsat but since I have two LNB's on my Dish and a motor something goes terribly wrong...the LNB for BEV and DISH must is 5 degrees from the center of the dish anybody else got this problem.......EITHER WAY..

MAIN QUESTION:

What is the latest working bin to use for the coolsat 6K , I looked in the coolsat 6k files link and there is no latest bin from October 2009, anybody know what bin is working??

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

For what's out there and available on other IRD's you don't need a bin but the last N2 bin was 178.

Thanks Bad*dawg, I will try bin 178...thanks for the swift reply!

As mentioned at present I know of no Viewsats or Coolsats working for FTA.

The Dish with motor....

Generally a FTA set-up using a motor does not have two lnb's. There is one Lnb and the dish is setup (along with receiver settings) so that when you choose a channel the dish will swing around to that specific satellite. If you then want another channel the dish moves to the satellite with that channel.

Here is what the dish should look like:

__________________
All information I provide is educational. To help you understand the "World of Free-To-Air".

well this is what o doi have 4 lnbs on my dish 1 lnb is for gc one is for bev and then the 2 others are for DN so i dont have to move my dish from 110 to 119 all the time so when i move it too 110 it can pick up the 119 as well

__________________
This is 10% luck, 20% skill, 15% concentrated power of will, 5% Pleasure, 50% Fifty pain, And a 100% reason to remember the name!

my help is for education only...

you can also have 3 lnb the dn lnb will work on a bev sat as well i did not know that when i put it on soo you dont need 4 you can go with 3 and get the same thing

__________________
This is 10% luck, 20% skill, 15% concentrated power of will, 5% Pleasure, 50% Fifty pain, And a 100% reason to remember the name!

my help is for education only...

Couple weeks back there was a strong rumor of a dongle for the CS 6000 and others "in a couple of weeks" anything new?

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!