Go Back   Free To Air TV Forum, FTA Keys and Downloads, Dish Network, Nagravision 3 > USA / Canada - DISH / BEV / GC > Satellite TV Receivers > Clones > Clones Discussion



Clones Discussion Clones Discussion

Reply
 
LinkBack (1) Thread Tools Display Modes
  1 links from elsewhere to this Post. Click to view. #1 (permalink)  
Old 19th November 2007, 07:55 AM
ViP Member
 
Join Date: Oct 2006
Posts: 30
Pantec Still Working?

I have found a pantec 2700 for sale in the local paper cheap..is it worth buying? i dont see any new files up for this
Reply With Quote
Sponsored Links

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

  #2 (permalink)  
Old 1st December 2007, 02:48 AM
ViP Member
 
Join Date: Sep 2006
Posts: 33
I can tell you I converted my Pantec 2500 into a Pansat 2700 and it was working well until the latest ecm, but everything is down right now. I used the method in the Fortec Ultra section, an alternate method(see below).

Anotherway to convert FTU to 2700 serial connection
--------------------------------------------------------------------------------
I point out, there are some Fortec star ultra model would not accept the janetgirl file ,I have attemped many times with his method and Chancysand's but no success so I have to convert it back to 294t bin . Now I have a successfull way to convert MY FTU & Pantec to a Pansat 2700 by following the instructions from another forum by using their file .This method is working .
Instructions how to covert to 2700

1. Open/Run the Blacklist updater included(1.4)
2. Make sure BIN is Selected not BOOT, you are writing a Bin
3. Click select BIN
4. Choose j27_205_1.bin
5. Reboot reciever, on first light/dash, Click write bin. let it write
When it is done, Be PATIENT!!!! let it reboot after 2-3 minutes you will see B-75 Flash on display of reciever.
6. Click select BIN
7. Choose jvvh_208_1.bin
8. Reboot reciever on first light Click write bin. let it write. let it reboot after 1 minute you will see B-75 Flash on display of reciever.
9. Now you need to put a new working bin on the receiver.
now Rewrite your Channel list back, BUT, BIG BUT, you must now select the 2700 settings in Channel master.
10. reconnect to Tv, select default key from parental options(key menu) let it roll
11. wait for next round
It should work all original or clone. Good luck and have fun.

*NOTE: You cannot load un modded Pansat 2700 bins onto a converted FLU/2500/Pantec, only modded bins from either:
Chancysand
or jvvh (Janetgirl)
or Ukr (Unknown modder)
Reply With Quote
Sponsored Links

Tired of waiting days for fixes? Click here to get 3000 channels.. NO DOWNTIME, Guaranteed!

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

LinkBacks (?)
LinkBack to this Thread: http://www.fortecfiles.com/clones-discussion/16206-pantec-still-working.html
Posted By For Type Date
FortecFiles.com - Powered by vBulletin This thread Refback 22nd November 2007 12:16 AM



Maritime-fta

All times are GMT. The time now is 01:27 PM.

eXTReMe Tracker
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0
vB Ad Management by =RedTyger=
Design By HTWoRKS