Quote:
Originally Posted by aquavettes
i have done the config so many times i can give it from memory
sv 360 premier
dhcp
local ip = Enter youe IP address and change the last two or three numbers on the far right to any number.
local port 1920 = Change to 80
subnet 255.255.255.0 = This is OK
gateway = Enter your Gatway that you wrote down.
dns yes = This is OK
domain www.svftaiks.com
dns ip = Enter your Gatway that you wrote down
server port 1920 = This is OK
Server IP = 77.93.75.89
serial #xxxxxxxxxxxxxxxx
priorty both |
= Clock on OK
First click on your Local Area Connection in your task bar and then open the Support tab. Write down your IP Address and Gateway.
Go to channel 200, should see something. If not then disconnect the iHub from the Sonicview and remove your network cable.
Power off the unit
Wait 5 to 10 seconds
Power on the unit
Make sure you have a picture on channel 100
Attach the bnetwork cable to your iHub and attach the iHub to your unit.
Wait for the iHub screen to show on your screen then go to 200
This should allow the IP change to be updated....hope this helps....
