how can i tell if i am hooked up to the server? i am on channel 304 the hbo2w and am getting a good signal but still says no service or scrambled. why won't this setup work? someone must have the answer. lol
have read and printed out all the ihub manuals and trouble shooting files but still cannot get the ihub to work.. have a sv8000 using belkin powerline adaptors to the ihub. settings in the config are as follows
user
setting type dhcp
local ip my ip
local port 1920
user dns yes
subnet 255.255.255.0
gateway my ip
use dns yes
domain name
www.svftaiks.com
dns ip my ip
server port 1920
seral number is the ihub number. have double checked # with
magnifying glass to be sure it is correct.
used priorty both
all i get is no service or scrambled. just have sat echostar7 and echostar 8,10in system. hdthr is working but no n3.
equipment is as follows
wildblue satilite modem hooked to belkin router
router connected to desktop xp computer and to belkin powerline adaptor
belkin powerline adaptor connected to 120v house wire outlet
other belkin powerline adaptor connected to 120v outlet and to ihub using rj45 ethernet cable
ihub connected to sv360 premier
green and amber lights on at the ihub
no n3 channels
any and all help would be greatly appreciated. thanks in advance
could i have a bad ihub since i get no n3 channels but i do get channel 100 and VS channel.